NAME

xcattest - Run automated xCAT test cases.


SYNOPSIS

xcattest [-?|-h]

xcattest [-f configure file] [-b case bundle list] [-l]

xcattest [-f configure file] [-t case list]

xcattest [-f configure file] [-c cmd list] [-l]


DESCRIPTION

The xcattest command runs test cases to verify the xCAT functions, it can be used when you want to verify the xCAT functions for whatever reason, for example, to ensure the code changes you made do not break the existing commands; to run acceptance test for new build you got; to verify the xCAT snapshot build or development build before putting it onto your production system. The xcattest command is part of the xCAT package xCAT-test.

The root directory for the xCAT-test package is /opt/xcat/share/xcat/tools/autotest/. All test cases are in the sub directory testcase, indexed by the xCAT command, you can add your own test cases according to the test cases format below. The subdirectory bundle contains all the test cases bundles definition files, you can customize or create any test cases bundle file as required. The testing result information will be written into the subdirectory result, the timestamps are used as the postfixes for all the result files. xCAT-test package ships two configuration files template aix.conf.template and linux.conf.template for AIX and Linux environment, you can use the template files as the start point of making your own configuration file.


OPTIONS

-?|-h

Display usage message.

-f configure file

Specifies the configuration file, if not specified, the default configure file is /opt/xcat/share/xcat/tools/autotest/default.conf.

-b case bundle list

Comma separated list of test cases bundle files, each test cases bundle can contain multiple lines and each line for one test case name.

-t cases list

Comma separated list of test cases that will be run.

-c cmd list

Comma separated list of commands which will be tested, i.e., all the test cases under the command sub directory will be run.

-l

Display the test cases names specified by the flag -b, -t or -c.


RETURN VALUE

0 The command completed successfully.

1 An error has occurred.


TEST CASE FORMAT

The xCAT-test test cases are in flat text format, the testing framework will parse the test cases line by line, here is an example of the test case:

  #required, case name
  start:case name
  #optional, description of the test case
  description: what the test case is for?
  #optional, environment requirements 
  os:AIX/Linux
  #optional, environment requirements
  arch:ppc/x86
  #optional, environment requirements
  hcp:hmc/mm/bmc/fsp
  #required, command need to run
  cmd:comand
  #optional, check return code of last executed command
  check:rc == or != return code
  #optional, check output of last executed command
  check:output== or != or =~ or !~ output check string
  end

Note: Each test case can have more than one cmd sections and each cmd section can have more than one check:rc sections and more than one check:output sections, the output check string can include regular expressions.


EXAMPLES

  1. To run all test cases related command rpower:

      xcattest -c /tmp/config -c rpower
  2. To run customized bundle:

      xcattest -l  > /tmp/custom.bundle
      Modify custom.bundle
      xcattest -b custom.bundle
  3. To run specified test cases.

      xcattest -t lsdef_t_o_l_z
  4. To add a new case to test chvm. In the example, we assume that the min_mem should not be equal to 16 in the lpar profile of computenode. The case name is chvm_custom. It create a test lpar named testnode firstly, that change the min_mem of the lpar to 16 using chvm, then check if min_mem have changed correctly. At last, the testnode be remove to ensure no garbage produced in the cases.

      add a new test case file in /opt/xcat/share/xcat/tools/autotest/chvm
      edit filename
      start:chvm_custom
      hcp:hmc
      cmd:lsvm $$CN > /tmp/autotest.profile
      check:rc==0
      cmd:mkdef -t node -o testnode mgt=hmc groups=all
      cmd:mkvm testnode -i $$MaxLparID -l $$CN
      check:rc==0
      cmd:perl -pi -e 's/min_mem=\d+/min_mem=16/g' /tmp/autotest.profile
      cmd:cat /tmp/autotest.profile|chvm testnode
      check:rc==0
      cmd:lsvm testnode
      check:output=~min_mem=16
      cmd:rmvm testnode
      cmd:rm -f /tmp/autotest.profile
      end


INLINE FUNCTIONS

The xCAT-test testing framework provides some inline functions. The inline functions can be called in test cases as __FUNCTIONNAME(PARAMTERLIST)__ to get some necessary attributes defined in the configuration file. The inline functions can be used in cmd section and the check:output section.

1. GETNODEATTR(nodename, attribute) To get the value of specified node's attribute

2. INC(digit) To get value of digit+1.

For example, to run rscan command against the hardware control point of compute node specified in the configuration file:

  rscan __GETNODEATTR($$CN, hcp)__ -z
3. B<GETTABLEVALUE(keyname, key, colname, table)> To get the value of column where keyname == key in specified table.


FILES

/opt/xcat/bin/xcattest