Name

rinv - Remote hardware inventory


Synopsis

rinv [-h|--help|-v|--version]

BMC/MPA specific:

rinv noderange {pci|model|serial|asset|vpd|mprom|deviceid|guid|firm|diag|bios|mparom|mac|all}

PPC (with HMC) specific:

rinv noderange {bus|config|serial|model|firm|all}

PPC (using Direct FSP Management) specific:

rinv noderange {firm}

rinv noderange {deconfig [-x]}

Blade specific:

rinv noderange {mtm|serial|mac|bios|diag|mprom|mparom|firm|all}

VMware specific:

rinv noderange [-t]

zVM specific:

rinv noderange [config|all]

rinv noderange [--diskpoolspace]

rinv noderange [--diskpool pool space]

rinv noderange [--fcpdevices state details]

rinv noderange [--diskpoolnames]

rinv noderange [--networknames]

rinv noderange [--network name]

rinv noderange [--ssi]

rinv noderange [--smapilevel]

rinv noderange [--wwpns fcp_channel]

rinv noderange [--zfcppool pool space]

rinv noderange [--zfcppoolnames]


Description

rinv retrieves hardware configuration information from the on-board Service Processor for a single or range of nodes and groups.

Calling rinv for VMware will display the UUID/GUID, nuumber of CPUs, amount of memory, the MAC address and a list of Hard disks. The output for each Hard disk includes the label, size and backing file location.


Options

pci

Retrieves PCI bus information.

bus

List all buses for each I/O slot.

config

Retrieves number of processors, speed, total memory, and DIMM locations.

model

Retrieves model number.

serial

Retrieves serial number.

firm

Retrieves firmware versions.

deconfig

Retrieves deconfigured resources. Deconfigured resources are hw components (cpus, memory, etc.) that have failed so the firmware has automatically turned those components off. This option is only capable of listing some of the deconfigured resources and should not be the only method used to check the hardware status.

-x

To output the information of deconfigured resources in XML format.

asset

Retrieves asset tag. Usually it's the MAC address of eth0.

vpd

Same as specifying model, serial, deviceid, and mprom.

diag

Diagnostics information of firmware.

mprom

Retrieves mprom firmware level

deviceid

Retrieves device identification. Usually device, manufacturing and product ids.

guid

Retrieves the global unique identifier

all

All of the above.

-h|--help

Print help.

-v|--version

Print version.

-t

Set the values in the vm table to what vCenter has for the indicated nodes.

zVM specific :

--diskpoolspace

Calculates the total size of every known storage pool.

--diskpool pool space

Lists the storage devices (ECKD and FBA) contained in a disk pool. Space can be: all, free, or used.

--fcpdevices state details

Lists the FCP device channels that are active, free, or offline. State can be: active, free, or offline.

--diskpoolnames

Lists the known disk pool names.

--networknames

Lists the known network names.

--network name

Shows the configuration of a given network device.

--ssi

Obtain the SSI and system status.

--smapilevel

Obtain the SMAPI level installed on the z/VM system.

--wwpns fcp_channel

Query a given FCP device channel on a z/VM system and return a list of WWPNs.

--zfcppool pool space

List the SCSI/FCP devices contained in a zFCP pool. Space can be: free or used.

--zfcppoolnames

List the known zFCP pool names.


Examples


SEE ALSO

rpower(1)